Kingston 8GB DDR-3 1333MHz KVR1333D3N9/8G Single Stick

Description

Kingston 8GB 1333MHz DDR3 Non-ECC CL9 DIMM
KVR1333D3N9/8G (Single Stick)

Description:
ValueRAM's 1G x 64-bit (8GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components.
The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V.
This 240-pin DIMM uses gold contact fingers.

Features:
JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
667MHz fCK for 1333Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [[][[]][[][[]]][[][[]][[][[]]]][[][[]][[][[]]][[][[]][[][[]]]]][[][[]][[][[]]][[][[]][[][[]]]][[][[]][[][[]]][[][[]][[][[]]]]]]either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1[[][[]][[][[]]][[][[]][[][[]]]][[][[]][[][[]]][[][[]][[][[]]]]][[][[]][[][[]]][[][[]][[][[]]]][[][[]][[][[]]][[][[]][[][%]]]]]])
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
PCB: Height 1.18” (30mm), double sided component

Specifications:
8GB 1333MHz DDR3 Non-ECC CL9 DIMM
Standard 1G X 64 Non-ECC 1333MHz 240-pin Unbuffered DIMM (DDR3, 1.5V, CL9, FBGA, Gold)
CL(IDD) 9 cycles
Row Cycle Time (tRCmin): 49.5ns (min.)
Refresh to Active/Refresh: 260ns (min.)
Command Time: (tRFCmin)
Row Active Time: (tRASmin) 36ns (min.)
Power (Operating): 1.200W*
UL Rating: 94 V - 0
Operating Temperature: 0° to 85°
Storage Temperature: -55° to +100°